TISSUE MILL

Mill was stopped at the end of December of 2007

Capacity 900 – 1.000 Tm/month

Material: 100 % recycled papers

Type of papers: tissue

Stock preparation:

-         Metallic belt conveyor, width 1.500 mm, power installed 7,5 c.v.

-         Helical pulper Lamort capacity 12 mr, built on stainless steel, with power installed 275 c.v. with neumatic valve DN-500

-         Pear Lamort PV3, capacity 3 m3, stainless steel

-         Pump Egger T7/200, with 20 h.p.

-         Conventional pulper capacity 17 m3, built on iron, with power motor 150 h.p.

-         Pump Licar 6/100/150 with 65 h.p.

-         Conventional pulper capacity 26 m3, on iron, with power 325 h.p.

-         Pump Licar 7/150 – HP4, with power 65 h.p.

-         Vibrating screen DGI size 1.000 x 1.500 mm, power 10 h.p.

-         Separaplast Maule GRIII, capacity 100 – 120 Tpd, power 100 h.p.

-         Pump Licar 250/150 power 20 h.p.

-         2 Deinking cells Lamort, built on stainless steel, with 22 colectors and regulation

-         Stainless steel tankcapacity 20 m3 with level box

-         Pump Egger TC-7-200 NP8 with power 50 h.p.

-         Stainless steel tank capacity 4 m3

-         2 level boxes on stainless steel with valves

-         2 pumps Egger TE7/200 with power motor 50 – 40 h.p.

-         HDC Voith model S2, flow 800 l/min

-         Krofta SPC24, with dilution tank

-         Drum thickner diameter 1.200 mm and width 4.500 mm, power motor 10 h.p.

-         2 refiners Beloit Jones DD3000 20” with power motor 250 h.p. / 988 r.p.m.

-         Section of cleaners with 38 cleaners Andritz model R-28-50

-         Vertical screen Voith model Multiscreen type MSS-06/06, power 30 kW, slotted ……

-         Minisorter Voith model MST-05/05, power 30 kW, slotted…..

-         Fractionator Trenner 6000, stainless steel, 2 m3

Tissue Paper Machine:

Machine type fourdrinier yankee machine, capacity 36 Tpd, papers from 18 – 30 gr/m2, width on pope reel 2.650 mm and speed maximum 650 m/min.

Machine built on 1975 but overhauled many times

-         Cleaner section 3 stages of pulclenaers with rejectomat

-         Fan pump ABS BA 250/250-32 with power motor 125 h.p.

Pressurized head box ESCHER WYSS slice width 2.730 mm, with tank

Fourdrinier not cantilevered, built by Emua, with foils, vacuufoils and suction boxes on stainless steel, composed by: 1 forming, 6 foils, 2 vacuufoils and 5 suction boxes

Cougu roll diameter 650 mm with CC power motor 40 h.p.

Vacuum pumps: Safem and Nash, power 45 – 125 – 175 – 215 h.p.

Yankee cylinder diameter 4.500 mm and width table 2.950 mm, rectifie in 2002 with power drive CC 200 h.p., with suction press recovered in 2005 with power motor CC 200 h.p., 1 NIP press, hood Aerothermic with 4 fans drive 100 h.p. with recuperation, 3 doctors Lantier

Broke pulper Emua type JP 120, capacity 2 m3, with power motor 60 h.p.

Pope reel Gorostidi for a diameter 1.000 mm with power installed CC 40 kw

Hydraulic Group

Pumps

Rewinder Pasaban, useful width 2.750 mm, with 2 belt unwinders, 14 knifes for to cut the paper sheet, drive 2 x motors 18,6 kw for each unwinder and 65 h.p. for the rewinder, speed maximum 1.000 m/min, reel lowering table and reception.

Compressors:

1 Betico 40 h.p. / 1.460 r.p.m.

2 Betico 20 h.p. / 1.460 r.p.m.

1 ABC 10 h.p.

Steam:

1 boiler new Babcock – Wanson, type BWS-D-60, capacity 6 Tm/h, press 15 bar and 210 ºC, installed new in 2004, water treatment.